G500.A70.N.ABS

A soft, colorable SEBS-based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

Processing Method: Injection Molding

Key Features

Excellent Adhesion to ABS
PC
PMMA
SAN
ASA
PET and PET-G
Insert Molding or 2K Molding
Soft Touch Surface

Typical Applications

Antislip Mats & Strips
Automotive Exterior
Automotive Interior
Automotive Under the Hood & Chassis
Electrical Equipment
Furniture
Grip
Household Goods
Industrial Castor Wheel
Water Installations & Plumbing

Regulations & Approvals

RoHS 2011/65/EU
ELV 2000/53/EC
EN 71-3

Download Datasheet/US

Download Datasheet/EU

Physical Properties

Property

Typical Value (English)

Typical Value (SI)

Test Method

Density

1,10 g/cm3

ASTM D792

Durometer Hardness, 3 sec (Shore A)

ASTM D2240

Durometer Hardness, 3 sec (Shore D)

ASTM D2240

Tensile Strength at Break

1595 Psi

11,00 MPa

ASTM D412, Method A

Mod. of %100 Elasticity

377 Psi

2,60 MPa

ASTM D412, Method A

Mod. of %300 Elasticity

740 Psi

5,10 MPa

ASTM D412, Method A

Elongation at break(%)

600 %

ASTM D412, Method A

Tear Resistance

257 lbf/in

45 N/mm

ASTM D624

Compression set (at 23⁰C, 73.40⁰F, 22h)

19 %

ASTM D395, Type 2, Method B

Compression set (at 70⁰C, 158⁰F, 22h)

65 %

ASTM D395, Type 2, Method B

Compression set (at 100⁰C, 212⁰F, 22h)

85 %

ASTM D395, Type 2, Method B

Compression set (at 125⁰C, 257⁰F, 72h)

ASTM D395, Type 2, Method B

Shrinkage (Flow)

1,48 %

ASTM D955

Shrinkage (Across Flow)

1,23 %

ASTM D955

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on reliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.