G500.A70.B.PA

A soft, black SEBS-based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

Processing Method: Injection Molding

Key Features

Excellent Adhesion to PA
Insert Molding or 2K Molding
Soft Touch Surface

Typical Applications

Automotive Exterior
Automotive Interior
Automotive Under the Hood & Chassis
Electrical Equipment
Grip (Hand Tools & Power Tools)
Household Goods
Industrial Castor Wheel
Industrial Gaskets & Equipment

Regulations & Approvals

RoHS 2011/65/EU
ELV 2000/53/EC
EN 71-3

Physical Properties

Property

Typical Value (English)

Typical Value (SI)

Test Method

Density

1,12 g/cm3

ASTM D792

Durometer Hardness, 3 sec (Shore A)

ASTM D2240

Durometer Hardness, 3 sec (Shore D)

ASTM D2240

Tensile Strength at Break

653 Psi

4,50 MPa

ASTM D412, Method A

Mod. of %100 Elasticity

348 Psi

2,40 MPa

ASTM D412, Method A

Mod. of %300 Elasticity

522 Psi

3,60 MPa

ASTM D412, Method A

Elongation at break(%)

500 %

ASTM D412, Method A

Tear Resistance

171 lbf/in

30 N/mm

ASTM D624

Compression set (at 23⁰C, 73.40⁰F, 22h)

18 %

ASTM D395, Type 2, Method B

Compression set (at 70⁰C, 158⁰F, 22h)

46 %

ASTM D395, Type 2, Method B

Compression set (at 100⁰C, 212⁰F, 22h)

76 %

ASTM D395, Type 2, Method B

Compression set (at 125⁰C, 257⁰F, 72h)

ASTM D395, Type 2, Method B

Shrinkage (Flow)

1,50 %

ASTM D955

Shrinkage (Across Flow)

1,15 %

ASTM D955

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on reliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.