C.V510.A75.B.EM.2

Circular TPE Based Elastron C

A soft, black TPV (EPDM /PP ) material belongs to thermoplastic elastomer (TPE) family with very good UV resistance, very good compression set that contains PIR/ PCR material.

Typical Applications

Material Features

Compliant with RoHS 2011/65/EU
Designed for Excellent Adhesion to EPDM
Insert Molding or 2K Molding Possible
Ozone Resistance
Pleasant Surface Feel for Soft Touch Applications
UV Resistance

Certification

RoHS

Processing Methods

Injection Molding

Physical Properties

Property

Typical Value (English)

Typical Value (SI)

Test Method

Density

g/cm3

0,89 g/cm3

ASTM D 792

Durometer Hardness, 3 sec (Shore A)

75,00

ASTM D 2240

Durometer Hardness, 3 sec (Shore D)

0,00

ASTM D 2240

Tensile Strength at Break

9,00 MPa

ASTM D412, Method A

Mod. of %100 Elasticity

3,10 MPa

ASTM D412, Method A

Mod. of %300 Elasticity

4,40 MPa

ASTM D412, Method A

Elongation at break(%)

1.000,00 %

ASTM D412, Method A

Tear Resistance

47,00 N/mm

ASTM D624

Compression set (at 23⁰C, 73.40⁰F, 22h)

ASTM D 395, Type 2, Method B

Compression set (at 70⁰C, 158⁰F, 22h)

0,00 %

ASTM D 395, Type 2, Method B

Compression set (at 100⁰C, 212⁰F, 22h)

0,00 %

ASTM D 395, Type 2, Method B

Compression set (at 125⁰C, 257⁰F, 72h)

0,00 %

ASTM D 395, Type 2, Method B

Flow

0,00 %

ASTM D624

Across Flow

0,00 %

ASTM D624

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on rliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.