V101.A79.B

A soft, black thermoplastic vulcanizate (TPV) based on EPDM/PP within the thermoplastic elastomer family, characterized by good mechanical properties and chemical resistance

Processing Method: Extrusion, Injection Molding

Key Features

Good Compression Set
Rubbery Surface Finish
Enhanced Processability
Good Mechanical Properties
Good Chemical Resistance
Adhesion to PP

Typical Applications

Antislip Mats & Strips
Automotive Exterior
Automotive Interior
Automotive Under the Hood & Chassis
Industrial Gaskets & Equipment
White Goods & Electrical Appliances
Window Profile & Door Seals
Wire & Cables

Regulations & Approvals

RoHS 2011/65/EU
ELV 2000/53/EC
EN 71-3

Physical Properties

Property

Typical Value (English)

Typical Value (SI)

Test Method

Density

0,97 g/cm3

ASTM D792

Durometer Hardness, 3 sec (Shore A)

ASTM D2240

Durometer Hardness, 3 sec (Shore D)

ASTM D2240

Tensile Strength at Break

1233 Psi

8,50 MPa

ASTM D412, Method A

Mod. of %100 Elasticity

580 Psi

4,00 MPa

ASTM D412, Method A

Mod. of %300 Elasticity

870 Psi

6,00 MPa

ASTM D412, Method A

Elongation at break(%)

700 %

ASTM D412, Method A

Tear Resistance

274 lbf/in

48 N/mm

ASTM D624

Compression set (at 23⁰C, 73.40⁰F, 22h)

26 %

ASTM D395, Type 2, Method B

Compression set (at 70⁰C, 158⁰F, 22h)

46 %

ASTM D395, Type 2, Method B

Compression set (at 100⁰C, 212⁰F, 22h)

58 %

ASTM D395, Type 2, Method B

Compression set (at 125⁰C, 257⁰F, 72h)

ASTM D395, Type 2, Method B

Shrinkage (Flow)

3,06 %

ASTM D955

Shrinkage (Across Flow)

1,16 %

ASTM D955

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on reliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.