G101.A65.B

A soft, black SEBS-based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Processing Method: Extrusion, Injection Molding

Key Features

Enables Co-Extrusion with Polyolefins
Smooth Surface Finish
Hot Plate Welding
Good Mechanical Properties
Good Chemical Resistance

Typical Applications

Automotive Interior
Household Goods
Industrial Gaskets & Equipment
Refrigerator Door Gasket
White Goods & Electrical Appliances
Window Profile & Door Seals

Regulations & Approvals

RoHS 2011/65/EU
ELV 2000/53/EC
EN 71-3
GENERAL MOTORS GM/QK007000

Physical Properties

Property

Typical Value (English)

Typical Value (SI)

Test Method

Density

1,18 g/cm3

ASTM D792

Durometer Hardness, 3 sec (Shore A)

ASTM D2240

Durometer Hardness, 3 sec (Shore D)

ASTM D2240

Tensile Strength at Break

1015 Psi

7,00 MPa

ASTM D412, Method A

Mod. of %100 Elasticity

305 Psi

2,10 MPa

ASTM D412, Method A

Mod. of %300 Elasticity

464 Psi

3,20 MPa

ASTM D412, Method A

Elongation at break(%)

750 %

ASTM D412, Method A

Tear Resistance

206 lbf/in

36 N/mm

ASTM D624

Compression set (at 23⁰C, 73.40⁰F, 22h)

18 %

ASTM D395, Type 2, Method B

Compression set (at 70⁰C, 158⁰F, 22h)

44 %

ASTM D395, Type 2, Method B

Compression set (at 100⁰C, 212⁰F, 22h)

74 %

ASTM D395, Type 2, Method B

Compression set (at 125⁰C, 257⁰F, 72h)

ASTM D395, Type 2, Method B

Shrinkage (Flow)

2,37 %

ASTM D955

Shrinkage (Across Flow)

1,00 %

ASTM D955

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on reliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.